I decided to start with the Ailerons and Flaps first before going onto the more complicated wings. Since this is the first time I will be working on my own, no instructor to lead, I thought if I screw up the ailerons or flaps it is not a big mistake and can be fixed easily by placing an order onto vans.
Here is the Flap support braces.
The flap inside structure.
The flap bottom skins clecko'ed on.
The flap top skins added.
The Flaps all clecko'ed together.
Dad helping to prime the parts.
The Aileron and Flap parts being primed.
The flaps being riveted together in V-blocks.
The Flaps almost done .
First Aileron task was to cut the stiffeners and to cleko and back drill them to the Aileron skins.
My wife inserting the rivets in the aileron stiffeners before back riveting.
The first skin back riveted on tip of my back rivet table.
The aileron inside structure.
The Aileron leading edge skin clecko'ed together.
The Aileron trailing skin clecko'ed in place.
My wife helping to clecko the aileron sub assembly together after it was primed.
The Flaps finally done
Me having some fun...trying to fly the ailerons ;-)
